The BG series of filler crown capper monobloc beer filling machine is manufactured and designed through the introduce of technology from Germany KRONES Co., its capability is in the leading position among the trades of the same kind in our country, with precise and accurate liquid level, low beverage loss. The cap crowning is manufactured through the introduction of technology from KHS co., it is used for filling and sealing beer with carbon dioxide and beverage.
(1) Reasonable Structure; the drive system is touching tightly the large bottom of the separated bedplate, which is convenient for maintaining and checking up. The filling vat is located on the bed that has six supporting legs, which is steady and firm .The drive system has precise turning support, which can avoid the broken glass damaging the cylinder.
(2) Two-time vacuum-eliciting system: It can reduce the increasing oxygen to the minimum in the process of filling. The set of rousing bubble can also decrease the amount of the air hauling in the neck of the bottle to the minimum.
(3) The starwheel and filling tank transportation is adopted with a plane enveloping toroidal worm reducer with high capacity of bearing, running synchronically and steadily. utilizing electric concentrating lubrication, so as to attain the goal of high efficiency, low accident, long life.
(4) The main drive and the bottle feeding and transporting line have frequency conversion electromotor and frequency conversion timing, which makes the whole filling system and bottle inputting and outputting rise and decline synchronously, avoiding bottle overturning.
(5) Adopting double-leader centering cover, which can tightly hold the mouth of the bottle.
(6) Utilizing special high-speed beer filling valve through the introduction of technology from German.
(7) The bottle-feeding and transporting board is set with wearable T type plastic. Adopting some easy-open structure such as baffle, starwheel, screw, so it is easy to utilize other bottles only just change a few of parts.
(8) Adopting multi-spout to scour broken glass, which ensure the cylinder and filling valve cleaned adequately
(9) Precise liquid level control: The liquid level in the filling tank is controlled by a floating ball inspector, main liquid-entering valve is controlled by the process controller, which can keep the liquid level accordant in the process of filling.
(10) The crowning caps are installed with the equipment of over-loading protection, when the bottle is over-high, it can get rid of the burthen automatically and reduce the rate of bottle breakage. Utilizing advanced apparatus to overturn the covers through the multi-material passages, which can stop automatically cap-selecting wheel and the filler/crowner respectively when bottles are full and lack of covers.
(11) Accurate speed: Adopting advanced electromotor frequency-modulating controlling technology, which can guarantee the speed-adjusting steadiness in the process of startup and produce. Utilizing PLC control and digital displaying of filling speed, the main sealing components and pneumatic parts are imported from foreign countries, which can keep the whole produce normal.